BXMSW - 14300 14320 14330 PLATIC WELDER ADHESIVE
- MSDS: BXMSW
- Manufacturer: ITW DEVCON CORP
- Product Name: 14300 14320 14330 PLATIC WELDER ADHESIVE
- National Stock Number: 6850-00F040957
Product Identification
Product ID:14300 14320 14330 PLATIC WELDER ADHESIVE
MSDS Date:02/09/1994
FSC:6850
NIIN:00F040957
MSDS Number: BXMSW
Responsible Party
DANVERS, MA 01923-5000
US
Emergency Phone: 508-777-1100/804-463-3476
Info Phone: 508-777-1100/804-463-3476
Cage: 16509
Contractor
Telephone: 508-777-1100
Cage: 16509
Ingredients
METHACRYLIC ACID
CAS: 79-41-4
RTECS: OZ2975000
Fraction By Weight: <8.5%
ACGIH TLV: 70 MG/CUM
METHYL METHACRYLATE, (MONOMER)
CAS: 80-62-6
RTECS: OZ5075000
Fraction By Weight: 40-60%
OSHA PEL 410 MG/CUM
ACGIH TLV: 410 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:ORAL LD50(RAT): >1000 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION: MAY
CAUSE IRRITATION OF MUCOUS MEMBRANES. METHYL METHACRYLATE-MAY CAUSE
SENSITIZATION. CHRONIC EXCESSIVE EXPOSURES MAY CAUSE ABNORMAL LIVER
& KIDNEY FUNCTION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, NAUSEA, DIZZINESS,
DROWSINESS, UNCONCIOUSNESS, ITCHING, SWELLING, RASHES.
Medical Cond Aggravated by Exposure:NONE REPORTED
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEEDED.
INGESTOIN: GIVE 2 GLASSES OF WATER TO DILUTE. DON'T INDUCE
VOMITING. OBTAIN MEDI CAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:51F
Lower Limits:1.8
Upper Limits:8.5
Extinguishing Media:WATER, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:USE WATER FOG BY TRAINED PERSONNEL. WEAR NIOSH
APPROVED SCBA. COOL CONTAINERS OF MATERIAL EXPOSED TO HEAT W/COLD
WATER SPRAY. FIGHT FIRE FROM A SAFE DISTANCE.
Unusual Fire/Explosion Hazard:SEALED DRUM EXPOSED TO HEAT FROM FIRE MAY
RUPTURE VIOLENTLY DUE TO POLYMERIZATION. VAPORS MAY TRAVEL TO
IGNITION SOURCE.
Accidental Release
Spill Release Procedures:LARGE: EVACUATE AREA, ELIMINATE IGNITION
SOURCES, WEAR APPROVED RESPIRATOR FOR HIGH VAPOR CONCENTRATION,
PROTECTIVE CLOTHING & OVERSHOES. ABSORB ON INERT MATERIAL. SMALL:
ABSORB ON INERT MATERIAL & TR ANSFER TO SUITABLE CONTAINER FOR
DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE AWAY FROM
HEAT, SPARKS & OPEN FLAMES. PREVENT SKIN & EYE CONTACT.
Exposure Controls
Respiratory Protection:NONE NEEDED IN NORMAL USE, W/ADEQUATE
VENTILATION.
Ventilation:LOCAL EXHAUST: OF VAPOR LEVEL < TLV. EXPLOSION PROOF.
MECHANICAL (GENERAL): OF VAPOR LEVEL < TLV.
Protective Gloves:IMPERVIOUS/SOLVENT RESISTANT RUBBER
Eye Protection:SAFETY GLASSES/SPLASH PROOF GOGGLES
Work Hygienic Practices:WASH THOROUGHLY AFTER USING. CONTACT LENSES
SHOULD BE FORBIDDEN.
Supplemental Safety and Health
THIS ORAL LD50 INFORMATION IS FOR METHYL METHACRYLATE.
Chemical Properties
Boiling Pt:B.P. Text:214F
Vapor Pres:29
Vapor Density:>1
Spec Gravity:1.03
pH:3-3.5
Evaporation Rate & Reference:(BU AC = 1): >1
Solubility in Water:MODERATE
Appearance and Odor:OFF WHITE LIQUID W/PUNGENT ACRYLIC ODOR
Percent Volatiles by Volume:40-70
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING/REDUCING AGENTS, AMINES, METALLICS.
Stability Condition to Avoid:HEAT, IGNITION SOURCES.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, OXIDES OF CARBON.
Conditions to Avoid Polymerization:EXTREME HEAT, INADVERTENT ADDITION
OF CATALYSTS.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. UN1133, DOO1 (IGNITABILITY).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.